You have more acres to harvest, which means starting harvest earlier – and sometimes at moisture higher than 32 percent – to get all your work completed on time. The solution is the CF and CR Corn Heads from John Deere. Available in a wide range of row spacings, these corn heads match the capacity of John Deere combines, letting you harvest up to 7,200 bu (253,721 L) per hour in high-yielding, dry corn. With the new CF18 30 expect 11 percent less passes / quarter section with the CF18 30 versus CF 16 30. You can harvest 65 more acres per day with a 16-row corn head compared to a 12-row corn head at the same ground speed.
Rota Disc is a trademark of Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG
No cornfield is perfect. John Deere corn heads make the best even better by offering features to help you tackle any field without hesitation, no matter how imperfect the conditions might appear.
John Deere CF and CR Corn Heads are built to handle corn residue. You can start managing residue right away during harvest by appropriately sizing and distributing the residue evenly across your field to speed decomposition and improve soil warming to make planting manageable and effective.
Calmer is a trademark of Calmer Corn Heads, Inc. Lankota and Stalk Stomper are trademarks of Lankota Group, Inc.
You have little control over the challenges that weather can bring. Wind damaged crops are often blown down, hiding the rows and making it nearly impossible to see where to harvest. The AutoPath™ system addresses these issues by providing accurate guidance lines even when the crop rows cannot be seen.
Approximate overall width | With 50.8-cm (20-in.) row spacing: 6.5 m 21.17 ft With 55.9-cm (22-in.) row spacing: 7 m 23 ft With 76.2-cm (30-in.) row spacing: 9.14 m 30 ft With 91.4-cm (36-in.) row spacing: 10.9 m 35.8 ft With 96.5-cm (38-in.) row spacing: 11.4 m 37.4 ft |
Row spacings | 50.8, 55.9, 76.2, 91.4, or 96.5 cm 20, 22, 30, 36, or 38 in. |
Deck plate adjustment | Hydraulic adjustment |
Gathering chain adjustment | Spring loaded, self-adjusting |
Gathering chains | Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link) |
Gathering points | Four-position, low-profile floating type hinged above gathering chains |
Center and outer gatherings | Hinged, quickly removable |
Gathering chains | Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link) |
Minimum clearance between gathering chains and ground | 32 mm 1.25 in. |
Row unit drive | Enclosed, submerged-in-lubricant gearbox, driven by single input hexagon shaft |
Gathering chain adjustment | Spring loaded, self-adjusting |
Stalk rolls | Opposed, intermeshing, and chopping (two per row-unit) |
Deck plate adjustment | Hydraulic adjustment |
Slip clutch | One per row-unit plus auger drive |
Trash knives | Full-length, one-piece, heat-treated steel |
Stalk deflectors | Factory-installed option |
Approximate overall width | With 50.8-cm (20-in.) row spacing: 6.5 m 21.17 ft With 55.9-cm (22-in.) row spacing: 7 m 23 ft With 76.2-cm (30-in.) row spacing: 9.14 m 30 ft With 91.4-cm (36-in.) row spacing: 10.9 m 35.8 ft With 96.5-cm (38-in.) row spacing: 11.4 m 37.4 ft |
Approximate folded width | Points in operating position (lowered) With 50.8-cm (20-in.) row spacing: 2.97 m 9.75 ft With 55.9-cm (22-in.) row spacing: 2.97 m With 76.2-cm (30-in.) row spacing: 3.2 m 10.58 ft With 91.4-cm (36-in.) row spacing: 3.2 m With 96.5-cm (38-in.) row spacing: 3.2 m Points folded up (service position) With 50.8-cm (20-in.) row spacing: 2.3 m 7.58 ft With 55.9-cm (22-in.) row spacing: 2.3 m With 76.2-cm (30-in.) row spacing: 2.6 m 8.58 ft With 91.4-cm (36-in.) row spacing: 2.6 m With 96.5-cm (38-in.) row spacing: 2.6 m |
Approximate shipping weight (includes shipping skid) | With 50.8-cm (20-in.) row spacing: 4534 kg 9996 lb With 55.9-cm (22-in.) row spacing: 4620 kg 10,185 lb With 76.2-cm (30-in.) row spacing: 3490 kg 7694 lb With 91.4-cm (36-in.) row spacing: 5416 kg 11,940 lb With 96.5-cm (38-in.) row spacing: 5149 kg 11,352 lb |
Row spacings | 50.8, 55.9, 76.2, 91.4, or 96.5 cm 20, 22, 30, 36, or 38 in. |
Standard weight | With 50.8-cm (20-in.) row spacing: non StalkMaster™ 3561 or StalkMaster 3965 kg 7851 or 8741 lb With 55.9-cm (22-in.) row spacing: non StalkMaster 3667 or StalkMaster 3490 kg 8084 or 7694 lb With 76.2-cm (30-in.) row spacing: non StalkMaster 3871 or StalkMaster 4275 kg 8534 or 9425 lb With 91.4-cm (36-in.) row spacing: non StalkMaster 4132 or StalkMaster 4534 kg 9110 or 9996 lb With 96.5-cm (38-in.) row spacing: non StalkMaster 4216 or StalkMaster 4620 kg 9295 or 10,185 lb |
Date collected | 15 June 2020 |
Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.