Easy-to-attach 3-point hitch
The R160 and R200 Mowers attach to tractors with a Category 1 and 2, 3-point hitch. The R160 and R200 are not quick-hitch compatible.
The R160 and R200 models rely on the parking stand to hold up 3-point hitch arms to ensure easy hook up to the tractor.
Adjustable lower hitch pins
Lower hitch pins can be adjusted left or right to match the mower offset for tractors with wider tire spacing. The R160 and R200 models have an offset range of 172 mm (7 in.).
Uptime |
Cutting arc provides a wide range of cutting angles |
Rotary disc cutterbar
A multi-V-belt drive system transfers power from the gearbox to each rotary disc.
Power is transmitted to the rotary discs through fully enclosed gears running in oil for a quiet, smooth, reliable operation.
All models have a spring-loaded belt tensioner for easier belt adjustment. The belt tension automatically compensates for initial belt stretch, increasing belt life.
High-speed rotary discs
Rotating at 2986 rpm, the high-speed discs cut in the toughest conditions.
The low-profile cutterbar allows a close cut while maintaining a level cutterbar. The cutting height is controlled by adjusting the tilt of the cutterbar.
Each disc has two free-swinging knives:
- Easy to remove and replace
- Two cutting edges, doubling the use life
Removable quill
The cutterbar is protected from severe impact should an object be struck.
- Disc drive-shaft shears
- Reduces chance of internal damage to cutterbar
- Improves cutterbar reliability
Disc quills are easily removed from the top of the cutterbar for improved serviceability.
Each disc has two free-swinging knives:
- Easy to remove and replace
- Two cutting edges, doubling the use life
- Swings away to reduce possible damage if a solid object is struck
Heavy floatation spring
The disc mowers use the hydraulic cylinder to lift the cutterbar from the cutting position to the transport position, where the cutterbar automatically locks into place.
The R160 has a cutting arc of +35 degrees to -22 degrees.
The R200 has a cutting arc of +35 degrees to -16 degrees.
A heavy spring establishes even flotation along the full length of the cutterbar in a variety of different field conditions and topography.
Performance |
Cutting arc provides a wide range of cutting angles |
| Mower | Number of disks
Five
Number of knives
10
Width of cut
2 m
6.58 ft
Weight
465 kg
1,025 lb
Disk speed
2,986 rpm
Cutting arc
+35 to -22 degree (angle)
Lift system
Hydraulic
Minimum PTO HP
26 kW
35 hp
PTO speed
540 rpm
|
| Number of disks | Five |
| Number of knives | 10 |
| Width of cut | 2 m
6.58 ft |
| Weight | 465 kg
1025 lb |
| Disk speed | 2986 rpm |
| Cutting arc | +35 to -22 degree (angle) |
| Lift system | Hydraulic |
| Minimum PTO HP | 26 kW
35 hp |
| PTO speed | 540 rpm |
0.9% APR fixed rate for 36 months on new John Deere Hay and Forage Tools
- 0.9% APR fixed rate for 36 months1
- Offer available 26 October 2024 through 03 February 2025
1Offer valid on qualifying purchases made 26 October 2024 through 03 February 2025. Subject to approved installment credit with John Deere Financial. No down payment required. $27.78 per month for every $1,000 financed. 0.9% APR for 36 months only. Taxes, freight, setup, fees, and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or in John Deere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new John Deere Round Balers, Round Bale Accumulators, Small Square Balers, Mower-Conditioners (excluding Triple-Mounted Mower-Conditioners), and Disc Mowers ONLY and in the U.S. only. Prices and savings in U.S. dollars.
Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.
