Transporting your disc mower has never been easier with the optional hydraulic tilt cylinder. Without getting out of your seat, you can engage the tractor hydraulics and the cutterbar will swing up and lock into place.
Designed with speed in mind
The R-Series Mowers were designed with speed in mind. Hook up quickly and easily with the Quik-Coupler system. Once you're hooked up, you'll zip through fields with discs that spin at just under 3000 rpm. Cut at +/- 35 degrees to horizontal to make mowing sloped fields and ditches a breeze.
features
Easy-to-attach 3-point hitch
The R240, R280, and R310 Mowers attach to tractors with a Category 2 3-point hitch and all three models are quick-hitch compatible.
The R240, R280, and R310 models have a built-in parking lock that holds the 3-point arms up, making tractor hookup quick and easy.
Adjustable lower hitch pins
Lower hitch pins can be adjusted left or right to match the mower offset for tractors with wider tire spacing.
The R240, R280, and R310 models have an offset range of 105 mm (4 in.).
Optional long hitch pin
Adjustable lower hitch pins and an optional longer hitch pin allow for use with tractors of various tire spacing.
Available through Parts: an optional long hitch pin increases mower offset to 200 mm (8 in.) for tractors with even wider tire spacing.
Uptime
Adjustable lower hitch pins and an optional longer hitch pin allow for use with tractors of various tire spacing.
Optional rearward-swinging hydraulic cylinder
A heavy-duty driveline with overrunning clutch is standard equipment on R240, R280, and R310 Mowers.
All mowers are equipped with a shielded, pullback-collar, telescoping power take-off (PTO) driveline.
Rotary disc cutterbar
A multi-V-belt drive system transfers power from the gearbox to each rotary disc.
Power is transmitted to the rotary discs through fully enclosed gears running in oil for a quiet, smooth, reliable operation.
Convenient belt adjustment location (R240, R260, R310)
All models have a spring-loaded belt tensioner for easier belt adjustment. The belt tension automatically compensates for initial belt stretch, increasing belt life.
High-speed rotary discs
Rotating at 2986 rpm, the high-speed discs cut in the toughest conditions.
The low-profile cutterbar allows a close cut while maintaining a level cutterbar. The cutting height is controlled by adjusting the tilt of the cutterbar.
Each disc has two free-swinging knives:
Easy to remove and replace
Two cutting edges, doubling the use life
Removable quill
The cutterbar is protected from severe impact should an object be struck.
Disc drive-shaft shears
Reduces chance of internal damage to cutterbar
Improves cutterbar reliability
Disc quills are easily removed from the top of the cutterbar for improved serviceability.
Each disc has two free-swinging knives:
Easy to remove and replace
Two cutting edges, doubling the use life
Swings away to reduce possible damage if a solid object is struck
Heavier floatation spring controlling ground pressure
A lift and suspension system allows for the R240, R280, and R310 models to raise the cutterbar off the ground without raising the tractor’s hitch.
The disc mowers use the hydraulic cylinder to lift the cutterbar from the cutting position to the transport position, and the cutterbar automatically locks into place.
A longer cylinder on the R240 and R280 allows for a cutting arc of +35 degrees to -25 degrees. A longer cylinder on the R310 allows for a cutting arc of +35 degrees to -30 degrees.
A heavier spring establishes even flotation along the full length of the cutterbar in a variety of different field conditions and topography.
Performance
Cutting arc provides a wide range of cutting angles
Storage compartment with locking clip
Storage compartment open
The R240, R280, and R310 models are standard equipped with an easy-to-access, built-in storage compartment. This convenient drawer is a perfect place for extra hardware such as nuts, bolts, and replacement knives.
Optional rearward-swinging hydraulic cylinder
Two extra hydraulic hoses for rearward-swinging cylinder
The R240, R280, and R310 models offer an optional rearward-swinging hydraulic cylinder. The optional hydraulic cylinder allows the operator to swing the mower away from the tractor, eliminating the need to fold up the protective curtain when putting the mower in transport.
Mowers with this option have two additional hydraulic hoses that control the hydraulic cylinder that swings the mower away from the tractor.
NOTE: The optional rear-swinging hydraulic cylinder will be available through Parts.
specs
Mower
Number of disks Six Number of knives 12 Width of cut 2.4 m 7.92 ft Weight 612 kg 1,350 lb Disk speed 2,986 Cutting arc +35 to -25 degree (angle) Lift system Hydraulic Minimum PTO HP 34 kW 45 hp PTO speed 540 rpm
Number of disks
Six
Number of knives
12
Width of cut
2.4 m 7.92 ft
Weight
612 kg 1350 lb
Disk speed
2986 rpm
Cutting arc
+35 to -25 degree (angle)
Lift system
Hydraulic
Minimum PTO HP
34 kW 45 hp
PTO speed
540 rpm
Offers & Discounts
0.9% APR fixed rate for 36 months on new John Deere Hay and Forage Tools
0.9% APR fixed rate for 36 months1
Offer available 26 October 2024 through 03 February 2025
1Offer valid on qualifying purchases made 26 October 2024 through 03 February 2025. Subject to approved installment credit with John Deere Financial. No down payment required. $27.78 per month for every $1,000 financed. 0.9% APR for 36 months only. Taxes, freight, setup, fees, and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or in John Deere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new John Deere Round Balers, Round Bale Accumulators, Small Square Balers, Mower-Conditioners (excluding Triple-Mounted Mower-Conditioners), and Disc Mowers ONLY and in the U.S. only. Prices and savings in U.S. dollars.
Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.
Our sales staff cares about finding the best unit for your needs
