Imagine changing your tillage depth faster than climbing out of your cab. For the first time ever, you can adjust tillage depth and pressure in only six seconds - a job that previously took 12 to 20 minutes. Make the change without climbing out of your cab, using only your fingertips and lowering your operating costs.
Get the highest returns from your tillage operation
When executed correctly, tillage can deliver great returns to your farm by increasing crop yield and reducing risk. The end goal of all tillage is to help create a level, smooth seedbed free of weeds. This provides the greatest opportunity for your planter or seeder to accurately and consistently place the seed at the correct depth and enable uniform crop emergence, setting the stage for maximum yield potential.
features
610 Chisel Plow
The 610 Chisel Plow is available in a variety of sizes to help match tractor horsepower and work designs.
Model
Width
Type of fold
Standards
Three-bar integral
2.44 m to 6.10 m (8 ft to 20 ft)
Non-fold
Rigid
TruPosition™
Tru-Depth™
Typical percents of the residue cover that remains from the 610 are listed as follows (the percentages do not take into account variables such as the condition of the residue, speed, and soil type):
Starting residue cover (percent)
Remaining non-fragile* residue cover (percent)
Remaining fragile** residue cover (percent)
with 406-mm (16-in.) sweeps
with 51-mm x 356-mm (2-in. x 14-in.) chisel point
with 102-mm x 368-mm (4-in. x 14.5-in.) shovel
with 76-mm x 610-mm (3-in. x 24-in.) shovel
with 406-mm (16-in.) sweeps
with 51-mm x 356-mm (2-in. x 14-in.) chisel point
with 102-mm x 368-mm (4-in. x 14.5-in.) shovel
with 76-mm x 610-mm (3-in. x 24-in.) shovel
100
80
70
60
60
55
50
45
45
90
72
65
55
55
50
45
40
40
80
65
56
50
50
45
40
35
35
70
55
50
42
42
38
35
30
30
60
50
42
35
35
33
30
27
27
50
40
35
30
30
27
25
22
22
40
32
28
25
25
22
20
18
18
*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu). **Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, cotton.
610 rigid frame
The 610 Chisel Plow features a large 102-mm x 102-mm (4-in. x 4-in.) tubular steel mainframe.
Welded construction adds the inner strength that withstands twisting and pulling through demanding field conditions.
Rigid standard
The rigid standard:
Is in base equipment on three-section models
Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
Design is suited for fields having few obstructions
Will till to 203 mm (8 in.) deep
Good clearance to handle heavy trash
711-mm (28-in.) underframe
305-mm (12-in.) spacing
TruPosition standard
The TruPosition standard:
Is optional on all models
Cast pivot assembly holds shank firm while working in the soil
Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
Shank is replaceable without disassembly of the standard assembly
Trip action is suited for fields having rocks or other obstructions
550-lb trip 711-mm (28-in.) standard will till to 203 mm (8 in.) deep
711-mm (28-in.) underframe
305-mm (12-in.) spacing
Trip height of 254 mm (10 in.) for good clearance
Slotted lower hole to aid in removing ground-engaging tools
Tru-Depth standard
The Tru-Depth standard:
Is optional on drawn rigid and select drawn flexible models up to 838 mm (33 ft)
Is 51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.); edge is bent for extra strength
Designed to work in rocky ground and heavy draft conditions
Will till to 305 mm (12 in.) deep
Trip height of 279 mm (11 in.)
568-kg (1250-lb) trip force
Excellent clearance to handle heavy trash
813-mm (32-in.) underframe
305-mm (12-in.) spacing
An implement warning light harness with a turn-signal module for two amber and two red lights are included as standard equipment for safe transport on roads.
The implement warning light harness requires one of the following:
Category 2, 3-point hitch with or without Quik-Coupler
Category 3 and 3N, 3-point hitch with or without Quik-Coupler
Horsepower requirements
The rigid and TruPosition™ standards require engine horsepower of 6 hp per ft to 10 hp per ft.
The Tru-Depth™ standard requires engine horsepower of 6 hp per ft to 14 hp per ft.
Operator's manual storage container
A 102-mm (4-in.) diameter container provides storage to give the operator easy access to the manual at the front of the machine. It is made out of a durable polyethylene and will keep the manual clean and dry in all weather conditions.
The container was designed exclusively for John Deere and the John Deere logo is shown on the lid.
Harrow
A handy three-bar coil-tine harrow attachment fits compactly behind the chisel plow.
There is 305 mm (12 in.) of fore-aft clearance between the bars plus vertical clearance of 305 mm (12 in.).
NOTE:Use the harrow attachment only on machines equipped with sweeps; do not use with the Tru-Depth™ standard.
specs
Type
Non-fold (integral)
Rigid frame
Option 1 2.44 to 6.1 m 8 to 20 ft
Rigid frame
Option 1 2.99 to 5.97 m 9.83 to 19.58 ft
Maximum depth
30.5 cm 12 in.
Miles per hour
8 to 11.3 km/h 5 to 7 mph
Horsepower per foot
Rigid and spring-reset standards: 14.7 to 24.5 kW/m 6 to 10 hp/ft Tru-Depth standards: 14.7 to 34.3 kW/m 6 to 14 hp/ft
Option 1
Tractor 3-point hitch
Tubing
High strength, box beam steel cross members: 10.2x10.2 cm 4x4 in. Steel end tubes, welded construction: 5.1x10.2 cm 2x4 in.
Fore-and-aft
182.9 cm 72 in.
Underframe clearance
Rigid and TruPosition™ standards: 71.1 cm 28 in. Tru-Depth: 81.3 cm 32 in.
Inches
30.5 cm 12 in.
Option 1
Spec 3.2x5.1x71.1 cm 1.5x2x28 in. Maximum operating depth 20.3 cm 8 in. Underframe clearance 71.1 cm 28 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. Rigid standard
Option 2
Spec 3.2x5.1x71.1 cm 1.25x2x28 in. Trip force 249.5 kg 550 lb Trip height 25.4 cm 10 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 71.1 cm 28 in. Spacing 30.5 cm 12 in. Standard: TruPosition
Option 3
Spec 5.1x3.2x81.3 cm 2x1.25x32 in. Trip force 567 kg 1,250 lb Trip height 27.9 cm 11 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 81.3 cm 32 in. Spacing 12, 16 Standard: Tru-Depth
Choices
Variety of sweeps, shovels, and chisel points
Stabilizer wheels
Option 1 Stabilizer wheel frames with 5.90 - 15 4PR implement tires (optional on 2.4-m [8-ft] base models, standard on 4.9-m [16-ft] base models)
Option 1
Rank spacing 30.5 cm 12 in. Spike/coil dimensions 30.5 cm 12 in. 3-bar coil tine
Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.
Our sales staff cares about finding the best unit for your needs
