Imagine changing your tillage depth faster than climbing out of your cab. For the first time ever, you can adjust tillage depth and pressure in only six seconds - a job that previously took 12 to 20 minutes. Make the change without climbing out of your cab, using only your fingertips and lowering your operating costs.
Get the highest returns from your tillage operation
When executed correctly, tillage can deliver great returns to your farm by increasing crop yield and reducing risk. The end goal of all tillage is to help create a level, smooth seedbed free of weeds. This provides the greatest opportunity for your planter or seeder to accurately and consistently place the seed at the correct depth and enable uniform crop emergence, setting the stage for maximum yield potential.
features
995 mainframe
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.
The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
Moldboard frame
All 995 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
Requires less 3-point hitch capacity
Requires less ballasting of the tractor front end
Eliminates initial cost and service requirements for one complete set of standards and bottoms
Integral on-land hitch
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
Category 3/3N Quik-Coupler compatible
Tractor rockshaft lever controls the raising and lowering of the plow
Maximum plowing depth to 356 mm (14 in.)
Provides ample clearance between the tractor tires and the plow
Front gauge wheels
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.
995 Moldboard Plow rear gauge wheels
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
Equipped with 6.70-15 tires for good flotation
Easy turnbuckle adjustment on rear gauge wheel
Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
specs
Option 1
2.3 m 7.5 ft
Option 2
2.7 m 9 ft
Option 3
3.2 m 10.5 ft
Option 4
3.7 m 12 ft
Plowing depth
35.6 cm 14 in.
Horsepower required - Option 1
5-bottom: 96.9-123 kW 130-165 hp
Option 2
6-bottom: 111.9-130.5 kW 150-175 hp
Option 3
7-bottom: 130.5-149.1 kW 175-200 hp
Option 4
8-bottom: 149.1-186.4 kW 200-250 hp
Type
Category 3N or 3
Steering
Integral, in-furrow No Integral, on-land Yes Semi-integral, on-land No Drawn, in-furrow No Drawn, on-land No Quick-coupler compatible Yes
Reversible
Type of reversing Hydraulic cylinder Yes
Option 1
5
Option 2
6
Option 3
7
Option 4
8
Option 1
2.3 m 7.5 ft
Option 2
2.7 m 9 ft
Option 3
3.2 m 10.5 ft
Option 4
3.7 m 12 ft
Option 1
1,678 kg 3,700 lb
Option 2
1,860 kg 4,100 lb
Option 3
2,041 kg 4,500 lb
Option 4
2,440 kg 5,368 lb
Vertical
81.3 cm 32 in.
Shearbolt
Standard
Safety trip
Optional
Spring reset
No
Hydraulic
No
Option 1
Plowing depth 35.6 cm 14 in. Steel moldboard
Option 2
Plastic moldboard
Option 1
Thickness: 17.8x10.2x0.8 cm 7x4x0.313 in.
Option 1
5-bottom: 96.9-123 kW 130-165 hp
Option 2
6-bottom: 111.9-130.5 kW 150-175 hp
Option 3
7-bottom: 130.5-149.1 kW 175-200 hp
Option 4
8-bottom: 149.1-186.4 kW 200-250 hp
Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.
Our sales staff cares about finding the best unit for your needs
