Imagine changing your tillage depth faster than climbing out of your cab. For the first time ever, you can adjust tillage depth and pressure in only six seconds - a job that previously took 12 to 20 minutes. Make the change without climbing out of your cab, using only your fingertips and lowering your operating costs.
Get the highest returns from your tillage operation
When executed correctly, tillage can deliver great returns to your farm by increasing crop yield and reducing risk. The end goal of all tillage is to help create a level, smooth seedbed free of weeds. This provides the greatest opportunity for your planter or seeder to accurately and consistently place the seed at the correct depth and enable uniform crop emergence, setting the stage for maximum yield potential.
features
19-mm (0.75-in.) ripper standard
The 19-mm (0.75-in.) straight shear-bolt standard design moves through the soil minimizing soil and residue disturbance at the soil surface.
Equipped with replaceable wear shins to control wear on the leading edge of the shank that greatly extends the life of the standard, unlike some of the competitive models
Can only be equipped with 64-mm, 178-mm, or 254-mm (2.5-in., 7-in., or 10-in.) minimum-till ripper points
The 19-mm (0.75-in.) straight standard is base equipment. It is also available as an attachment for field conversion.
The 2100 Minimum-Till Ripper is available in working widths from 2.29 m to 6.86 m (7.5 ft to 22.5 ft).
Working width
Number of standards
Spacing
2.29 m (7.5 ft)
3
762 mm (30 in.)
3.05 m (10 ft)
4
762 mm (30 in.)
3.81 m (12.5 ft)
5
762 mm (30 in.)
5.33 m (17.5 ft)
7
762 mm (30 in.)
6.86 m (22.5 ft)
9
762 mm (30 in.)
6.86 m (22.5 ft) fold
9
762 mm (30 in.)
Frame on seven-standard model
The frame is constructed with a 102-mm x 152-mm x 10-mm (4-in. x 6-in. x 0.375-in.) cross tube on three-, four-, five-, and seven-standard machines and 152-mm x 152-mm x 10-mm (6-in. x 6-in. x 0.375-in.) cross tube on nine-standard models where the hitch-mounting components are welded for maximum strength.
Truss tubes connect the cross tubes and are constructed with 127-mm x 127-mm x 13-mm (5-in. x 5-in. x 0.5-in.) steel tubing.
Welded together into one assembly, the frame is designed to handle the most severe operating conditions.
The mainframe is 4.06-m (160-in.) wide and is the same whether there are five shanks on 762-mm (30-in.) spacings. Frame extensions make this task possible and make configurations easier to adjust.
Nine-standard drawn hitch
A drawn hitch option is available for those who want to use large row-crop tractors or four-wheel drive (4WD) tractors without a 3-point hitch.
The drawn hitch is only compatible with seven-standard and nine-standard 762-mm (30-in.) models. The drawn hitch is also available as an attachment for field conversion.
The transport wheels are placed in front of the front rank of the mainframe. This allows residue to flow freely and keeps the wheels close to the standards to allow the ripper to follow the ground contour.
The wheel modules are mounted to the front, rear, and end frame of the ripper, making it the most stable wheel package in the in-line ripper market. The tires are placed directly in front of the ripper standards so the shanks can remove the tire track to leave as level a profile as possible.
There is no need for stabilizer wheels with the drawn hitch. The wheels are located within 762 mm (30 in.) of the outside edge of the machine to provide stability in both field and transport conditions.
The nine-standard model has eight-bolt hubs and spindles with beefy 12.5L-15 tires. The seven-standard model uses 11L-15 tires. The large tires provide excellent field flotation and transport stability.
A pressure-compensating flow divider is the heart of the depth control system. Temporary adjustments can be made while maintaining the ability to raise and lower evenly.
The machine does not need to be fully raised at the end of a pass to keep the cylinders in phase, and cylinder stops are used to set the overall operating depth.
NOTE: The drawn hitch attachment is only compatible with serial number 1300 or newer machines.
Seven-standard drawn hitch folded
Closing wheel
Closing wheels can be added to the rear of the 2100 Minimum-Till Ripper with 19-mm (0.75-in.) standards.
Closing wheels offer the following benefits:
Minimize surface disturbance created by the standard
Provide more adjustments to match farming practices and varying soil conditions than competitive models
114 kg (250 lb) of down pressure
Mounted close to the shank, allowing a high trip clearance for operation through washouts, etc.
Mounted with an L-bracket, allowing better soil and residue flow
Cushion coulters (straight blade shown)
Cushion coulters cut and size residue and pre-slice the soil to allow a more level soil profile.
Cushion coulters are available in two blade choices:
559-mm x 5-mm (22-in. x 0.177-in.) straight blade allows the least amount of soil and residue disturbance
559-mm x 5-mm (22-in. x 0.177-in.) rippled blade for when increased soil movement is desired
Adjustable stabilizer wheels
Two adjustable 521-mm x 203-mm (20.5-in. x 8-in.) stabilizer wheels are included in base equipment to ensure straight travel and provide support on three-, four-, five-, and seven-standard sizes. The nine-standard size has four stabilizer wheels.
The stabilizer wheels are designed to stabilize the unit and are not intended to be used as depth gauge wheels. The weight of the unit must be carried on the tractor.
Additional stabilizer wheels and tires can be added if field conditions warrant more support.
specs
Working width
2.3 m 7.5 ft 2.7 m 9 ft 3.05 m 10 ft 3.8 m 12.5 ft 4.6 m 15 ft 5.3 m 17.5 ft 6.8 m 22.5 ft
Transport width
3.05 m 10 ft 4.1 m 13.5 ft 5 m 16.5 ft 6.7 m 22 ft 4.7 m 15.5 ft
Operating depth
Maximum 40.6 cm 16 in.
Miles per hour
6.4-8 km/h 4-5 mph
Horsepower per standard
22.3-29.8 kW 30-40 hp Depending on soil type, moisture, and depth of operation NOTE: Maximum compatible tractor engine - 231.2 kW 310 hp
Spacings
76.2 cm 30 in. 91.4 cm 36 in.
Type
In-line ripper
Option 1
Standard: 3, spacing: 76.2 cm 30 in.
Option 2
Standard: 3, spacing: 91.4 cm 36 in.
Option 3
Standard: 4, spacing: 76.2 cm 30 in.
Option 4
Standard: 5, spacing: 76.2 cm 30 in.
Option 5
Standard: 5, spacing: 91.4 cm 36 in.
Option 6
Standard: 7, spacing: 76.2 cm 30 in.
Option 7
Standard: 9, spacing: 76.2 cm 30 in. Rigid
Option 8
Standard: 9, spacing: 76.2 cm 30 in. Folding
Option 1
2.3 m 7.5 ft
Option 2
2.7 m 9 ft
Option 3
3.05 m 10 ft
Option 4
3.8 m 12.5 ft
Option 5
4.6 m 15 ft
Option 6
5.3 m 17.5 ft
Option 7
6.8 m 22.5 ft
Option 8
6.8 m 22.5 ft
Option 1
3.05 m 10 ft
Option 2
3.05 m 10 ft
Option 3
3.05 m 10 ft
Option 4
4.1 m 13.5 ft
Option 5
4.1 m 13.5 ft
Option 6
5 m 16.5 ft
Option 7
6.7 m 22 ft
Option 8
4.7 m 15.5 ft
Maximum
40.6 cm 16 in.
Size
102x152x0.9.5 mm 4x6x0.375 in. 9 standard: 152x152x9.5 mm 6x6x0.35 in.
Maximum underframe clearance
89 cm 35 in.
Miles per hour
6.4-8 km/h 4-5 mph
Horsepower per standard
22.3-29.8 kW 30-40 hp Depending on soil type, moisture, and depth of operation NOTE: Maximum compatible tractor engine - 231.2 kW 310 hp
Option 1
3-point hitch for integral
Option 2
Single point for pull-type
Option 1
Pull type: 1 SCV (lift) at 17,237 kPa 2500 psi for optimum raise times
Option 2
Low transport: 1 SCV (fold) at 17,237 kPa 2,500 psi for optimum raise times
Options
Integral, or 7- or 9-standard pull type
Three-point hitch requirements
Category 2, Category 3 and 3N (with Quik-Coupler)
Pull-type description
Level Lift
Spacings
76.2 cm 30 in. 91.4 cm 36 in.
Option 1
Trip force Shear bolt: 3,265.9 kg 7,200 lb Standard type 19 mm 0.75 in. or 31.75 mm 1.25 in. Straight with wear shin Shear-bolt
Option 2
Trip force 1,451.5 kg 3,200 lb Trip height 30.5 cm 12 in. Standard type 19 mm 0.75 in. Cushion trip
Options
Standard: 19 mm (0.75 in.), min-till point: 178 mm (7 in.), low-disturbance: 254 mm (10 in.), ultra-low-disturbance: 63 mm (2.5 in.) Standard: 31.75 mm (1.25 in.), Regular: 57 mm (2.25 in.), Capped: 57 mm (2.25 in.), Double-capped: 57 mm (2.25 in.) LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.)
Type
Spring cushion coulters
Pounds of force
Normal working load: 272.2 kg 600 lb Deflection of: 10.2 cm 4 in. Maximum trip load: 362.9 kg 800 lb Deflection of: 20.3 cm 8 in.
Blades
Straight or rippled: 559x4.5 mm 22x0.177 in.
Description
Two adjustable wheels on 3-, 4-, 5- and 7-standard sizes. Four adjustable wheels on 9-standard integral only. Drawn hitch machines do not require stabilizer wheels.
Down force
113.4 kg 250 lb
Size
10.2x40.6 cm 4x16 in.
Spacing
19.05 to 35.6 cm 7.5 to 14 in.
Angle adjustments
0 to 15 degree (angle)
Type
Stabilizer wheels
Wheels
52.1x20.3 cm 20.5x8 in.
Tires
10 PR
Description
12.5L-15 tires for 9-standard pull-type; 11L-15 tires for 7-standard, pull-type; 9-standard has 8-bolt hubs and spindles
Prices and availability may vary by dealer. Taxes not included. Images for illustration purposes only. Financing subject to approved credit by John Deere Financial. Down payment may be required to receive financing. Restrictions may apply outside of Hutson’s area of responsibility. See dealer for details.
Our sales staff cares about finding the best unit for your needs