The John Deere 500 Style attachment carrier allows one person to quickly change attachments without the use of tools.
Changing from bucket to pallet fork or bale spear takes only seconds to allow for increased productivity.
Simply remove the retaining pin on each side of carrier, back away from first implement, connect to second and reinstall clip pins.
No tools needed nor heavy pins to pull.
Step 1
Retaining pin
Detail of indicated area with pin in storage area
With the bucket level or slightly rolled back, simply remove the retaining pins and place in storage position.
Step 2
Roll the attachment forward to disengage pins
Roll the attachment forward to disengage the lower pins.
Step 3
Lower attachment to ground-disengage top hooks
Lower the attachment to the ground to disengage the top hooks.
Step 4
Back away from attachment
Back away.
To install another attachment simply reverse these steps.